HPH4255 550-Bushel
Overview:
HPH4255 383.39 Cu. Ft. Struck Per ASAE S324.2 Hydra-Push
- Center Drive System
- Solid Virgin Grade Poly Floor & Sides
- Channel Floor Supports Spaced at 9½” for Superior Strength
- Easily Removable Beater Assembly
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Value Your Trade
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. This information is provided for illustrative purposes only and does not constitute an application.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Request Brochure
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
- All horizontal beater hydraulic push models use solid virgin grade poly with UV inhibitor for the floor and sides, allowing less friction.
- The hydraulic endgate has two cylinders with ⅜″ hose and pipe for faster operation in cold weather.
- Heavy-duty rectangular tubing is used for the pole to ensure strength and long life.
- Structural channel floor supports are spaced 9 ½″ apart are used for maximum floor strength.
- Driveline protection is provided by a constant velocity PTO and straight shaft under the spreader connect to the rear mount angle gearbox, over to the beater drive sprocket, and then to the beater assembly.
- The hydraulic push-off system on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
- Beater blades are replaceable.
- Beater assembly is removable for stockpiling manure.
- Removal of the beater assembly is done by simply removing the mounting bolts and removing the drive chain to the beater assembly.
- Choice of bullnose or clevis hitch
- Poly bump rails
- LED highway lighting
Specifications
| MODEL | HPH4255 |
| Capacity | |
| Capacity - Old Rating | 550 bu |
| Capacity - Cu. Ft Struck Level Per ASAE S324.2 | 383.39 |
| Capacity Cu. Ft. Heaped Per ASAE S324.2 | 511.27 |
| Height | |
| Side Loading Height | 81″ (205.7 cm) |
| 2nd Beater Height | 86 ¾″ (220 cm) |
| Vertical Beater Height | - |
| Height - Top of Hyd. Endgate | 85 ½″ (218 cm) |
| Height at Top of Pusher | 95″ (241 cm) |
| Height - Top of Screen | - |
| Dimensions | |
| Inside Width | 72″ (183 cm) |
| Inside Length | 15′ (4.6 m) |
| Inside Depth | 53″ (135 cm) |
| Overall Width w/Tires | 10′ 2″ (310 cm) |
| Overall Length | 28′ (8.5 m) |
| Construction | |
| Standard Number of Beaters | 2 |
| Horizontal Beater Diameter/Lower | 29″ (71 cm) |
| Horizontal Beater Diameter/Upper | 29″ (71 cm) |
| Vertical Beater Diameter | - |
| Replaceable Beater Paddles | Yes |
| Removeable Beater Assembly | Yes |
| Hub | 10 Bolt |
| Hitch Choices | Clevis or Bullnose |
| Tire Choices | 425 x 22.5 Used Truck Tires, or Heavy-Duty Tandem Axle w/600/50 x 22.5 |
| Hydraulic Endgate | Standard |
| Poly Side Rails | Standard |
| PTO Choices | 1 ⅜" or 1 ¾" 1000 RPM PTO w/Overrunning Clutch |
| Hydraulic | |
| Hydraulic Push Cylinder Diameter | 4 ½″ |
| Weight w/Tires | |
| Weight w/Tires | 8,500 lbs. |
| Standard | |
| Rear Hydraulic Endgate | Standard |